Loading... Please wait...

Our Newsletter

TechT A5 Vortex Mod

  • Image 1
0.30 LBS
Calculated at checkout

Product Description

The Vortex Mod is hard-coated and teflon coated aluminum internals that replace the stock plastic internals of the Tippmann Cyclone Feed.

With the recent release of high-end electronic boards for the Tippmann A5 and 98 Pro E that allow for rates of fire of up to 30 BPS, has come the need for higher performing internals for the cyclone feed.

Our testing has shown that the Vortex Mod will allow the Cyclone feed to work at lower pressures, feed faster, and last longer than the stock internals.

While stock cyclone internals need to be replaced on a regular basis, the Vortex Mod is a permanent solution that makes the cyclone into the fastest, and most reliable loader available.

The Vortex Mod will feed upwards to 25-26 balls per second and continue to load down to pressures as low as 200psi.

Stock parts only feed up to 15 balls per second and only down to a pressure of 400 psi.

Our Testing has shown:

1. With the Vortex Mod, your cyclone will continue to feed at lower pressures. This means little to no manual feeding when you get low on air.

2. Due to the use of teflon and our modified ratchet and axle design your loader will have less internal friction with each cycle. This means higher potential rates of fire, and less wear and tear.

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Add to Wish List

Click the button below to add the TechT A5 Vortex Mod to your wish list.

You Recently Viewed...