The Tippmann Crossover is a sleek, lightweight, center fed marker that embodies woodsball durability with tournament speed and agility. The marker is smaller than any other made by Tippmann and is of comparable size to other tournament markers. As they have done so many times in the past Tippmann is set to redefine the gold standard in paintball markers again, with the Crossover.
At the core of the Crossover is the proven FlexValve. FlexValve Technology makes the Crossover the first electro-pneumatic speedball style marker to offer the winning combination of improved air efficiency, superior accuracy due to the spool valve design, manual or electronic mode firing, and the flexibility of CO2 or High Pressure Air (HPA). Although the Crossover will work on CO2 it needs to be setup properly, such as using a remote line and using a low rate of fire so marker internals do not freeze.
The ruggedness of the FlexValve and the ability to operate below 300 PSI will give all players the competitive edge on the woodsball or speedball field. The low operating pressure greatly improves air efficiency allowing you to get up to 1,400 shots from a 68 cubic inch 4500 psi tank.
The Crossover’s searless trigger design incorporates fewer parts to wear, making maintenance easier than ever. Because this new marker is built around the existing Phenom internals and can accept an A5 threaded barrel the look may be a little foreign to die hard Tippmann users but the feel, reliability and performance are undoubtedly Tippmann.
Like the Phenom the Crossover has a lightweight aluminum body with internal gas line and no cocking handle. Unlike the Phenom the Crossover has sleek lines with custom body milling and all excess metal shaved back.
Like other tournament markers the Crossover is a center feed and comes with a clamping feed neck that will adjust to fit any loader without tools. The center feed system also uses beam break style eyes to prevent ball chopping and dual ball detents to hold the most brittle paint without barrel breaks.
One thing players will immediately notice about the Crossover that makes it different than any other tournament marker is a manual thumb safety on the left side of the receiver body with three settings; Safe, Semi, Electro. As the name implies Safe prevents the marker from firing. Semi means the marker will fire one shot with each pull of the trigger, because of the FlexValve Semi will work without a battery in the marker. Electro setting activates the markers electronics. The stock board will fire up to 15 balls per second, full auto, PSP, NXL, response and three round burst. A single button on the back of the grip is used to program the board or turn the eyes on and off.
In the past, Tippmann markers have angled the Air Source Adapter (ASA – the thing the tank screw into) at an angle so liquid CO2 would not be drawn into marker when fired. The Crossover is the first Tippmann marker to have a 90 degree ASA that brings the marker down to eye level and in closer to the body when shouldered.
The Crossover will run on CO2 or HPA. Most HPA tanks put out 800 pounds per square inch (PSI) pressure, because the Crossover operates at 300 psi Tippmann has designed an ASA that regulates the pressure from the tank down to a useable level for the marker. To lighten the marker the regulator for the Crossover is built into the ASA with a velocity adjustment on the front of the regulator.
The engineers at Tippmann have thought of players who want to degas the marker when not playing but not remove the tank. With the Crossover players have the option to remove the factory installed regulator ASA and front grip and install a vertical regulator and on / off ASA. In only minutes with a few off the shelf parts and a macro line the unique appearance of the Crossover can be changed to look like more traditional tournament markers.
Unlike other high end tournament markers the Crossover has kept woodsball players in mind. The gap between the front grip and trigger guard is wider to leave room for gloved hands. The same is true of the oversized trigger guard that allows players to easily roll the trigger while wearing bulky milsim gloves.
| CompulsivePaintball.com is not responsible for typographical errors in pricing or product specification inaccuracies
Copyright 2012 CompulsivePaintball.com, all rights reserved