Eclipse Ego 11 Gun - Regal 3 

The Planet Eclipse Ego11 has been developed and created with the soul intention of giving the modern player the things they most desire in a modern paintball marker. A smoother shot. A quieter sound signature. Outstanding Efficiency. Unparalleled reliability. Simplicity. Industry-Leading Customer Service. Ergonomics. And built-in User Adjustability and choice. All from a company that whatever the situation, whatever the occasion, will always have your back.

The Planet Eclipse Ego11 comes equipped with an industry first. A bespoke solenoid manufactured by MAC Valves USA that incorporates twin flow control devices. Etched into the side of the solenoid body is easy to make out the two incremented scales. Below the scales are two one-quarter turn Solenoid Flow Controls. These Solenoid Flow Controls, fitted with pointer and limit stops, can now be used to independently control both the forward and rearward speed of the Rammer. For the first time ever in a poppet marker the user can now tune the speed, feel and rate of fire of their own marker with a simple twist of an adjuster. In the time it takes you to turn off your tourney lock, the Planet Eclipse Ego11 can be switched from a high speed, max ROF, uncapped, free-for-all machine, into the softest, gentlest, smoothest shooting capped PSP poppet you have ever felt. Or how absolutely anything in between?! The analogue adjustment means infinite control of the speed of the bolt and rammer in either direction giving unprecedented influence over the dynamic characteristics of each marker. It looks like you really can have your cake and eat it with the Planet Eclipse Ego11.

But the solenoid is not the only place that has a complete overhaul. Take a look around the grip frame and there are several things that should jump out.

-POPS ASA (Push on Purge System) is a new concept in On/Off purging tank adapters. A simple pushbutton on/off valve with a purge. No knobs or levers to fumble with anymore. 

-You should not need any introduction for the SL3 regulator. Used on all the Eclipse paintball guns like the Planet Eclipse Ego, Planet Eclipse Geo, Planet Eclipse Eteck, and now the Planet Eclipse Etha. One of the most consistant and reliable
inline paintball regulator on the market. You will be ale to squezze every shot out of your paintball tank. Designed to work with any tank on the market you can even switch from a high pressure tank to a low pressure tank without any ill effects on the marker velocity. 

-The new ergonomic frame has a higher grip postion and all new grip that is sunk into the frame. A brand new co-molded console that runs up the back of the frame for more comfort and grip. a few simple mechanical changes have been made to ensure the grip screws tighten down with the chance of crushing any of the electronics inside the frame.

-The Eclipse circuit board, fitted with an extra large tru-color LCD screen, speaker, three external pushbutton's, and the option to use an opto sensing or micro switch for the trigger. The range of adjustment will blow your mind and if thats not enough you can get the Eclipse E-portal 2 kit that will alow you to connect your Eclipse Ego to your PC. Refill counters, ROF indicators, timers, audible beeper, debounce presets, RF enabled, you name it, the Eclipse Ego 11 board will do it or support it.

-A new trigger is also in the frame of the Eclipse Ego 11. With a new spring system, and bearing carrier the trigger has 5 points of adjustment.Forward travel, rearward travel, magnetic return strength, spring return strength and finally micro-switch actuation point.

-Internally the Planet Eclipse Ego11 boasts the Zick2 kit, the Cure3 bolt, the same adjustable LPR found on SLs as well as the LP protection vent that was found in the Planet Eclipse Ego10. All highly proven, tournament winning components.

-The new Shaft 4 Barrel is 14 inches and the bore size is .689. The Shaft 4 has been receiving fantstic reviews since its launch on the Eclipse Geo 2. It has also been re-designed to be more efficient, more consistant, and a reduced sound signiture.

The Eclipse Ego 11 comes packed in a zippered case and includes a full hex key set, Eclipse Gun Oil, a barrel sock, a 84 page full color manual and a comprehensive spare parts kit that includes o-rings, detents, springs, and screws.

- Dimensions
- Weight – 882g/1.94lb Including 14” Shaft4 Barrel, Battery, Feed Tube, OOPS
- Length – 542mm Including 14” Shaft4 Barrel
- Height – 211mm
- Width – 27mm

Materials

- Body – 6061-T6 Aluminium
- Barrel – 6061-T6 Aluminium
- Frame – 6061-T6 Aluminium
- Feed – 6061-T6 Aluminium
- Eye Covers – 6061-T6 Aluminium

Electronics

- Interface – 3 Pushbuttons On Frame, Tourney Lock on PCB
- Display – Transflective LCD w/ Tru-Color Adjustable Backlite
- Solenoid voltage – 5V
- Processor voltage – 3V
- Processor – 16-Bit 16MIPS
- Power Supply – 1 x 9V (PP3) Battery
- Interface – E-Portal Compatible

Hardware

- ASA Mount – T-Slot mounted adjustable rail with POPS (Push On Purge System)
- Trigger Methods – Micro Switch and Break-Beam Opto-Switch
- Trigger Mechanism – Leaf Spring and Magnetic Return
- Trigger Pivot – Dual Instrument Ball Race Units Mounted in Bearing Carrier
- Barrel – 2-Piece Micro Honed Shaft4 14” length 0.689” Bore
- Feed Tube – Lever Operated Clamping Feed with Sprocket Thumb Wheel

Pneumatics

Operating Principle – Under and Over Poppet
Solenoid Type – Custom MAC Solenoid Valve
Drive Mechanism – Zick2 Rammer System
Bolt Mechanism – Cure3 Bolt
Ergonomics
Grip Type – Contoured Dual Density Grip
Grip Pitch – 162mm
Firmware

Firing Modes – Semi and Ramping Capped and Uncapped
Debounce Modes – 10 Debounce Modes

View all Eclipse items